Gemalto is now part of the Thales Group, find out more.

You are here

Install incorrect parameters ERROR | Thales IoT Developer Community

Yas's picture

September 1, 2021 - 11:58am, 1648 views

Good Morning,

I'm trying to install a software on the ELS6 module. The software was originally developed for TC65i.

I've installed all the new SDK and libraries, and I always receive an "Incorrect parameters" error when trying to install the updated soft with 


I have all the necessary params in the JAD file, they match the manifest.

I have checked all the AT command inside the program to be sure that the new specs matches.

Any ideas ?

Module config is :

^SCFG: "Audio/Loop","0"
^SCFG: "Call/ECC","0"
^SCFG: "Call/Speech/Codec","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Gpio/****/ASC1","std"
^SCFG: "Gpio/****/DAI","gpio"
^SCFG: "Gpio/****/DCD0","std"
^SCFG: "Gpio/****/DSR0","std"
^SCFG: "Gpio/****/DTR0","std"
^SCFG: "Gpio/****/FSR","gpio"
^SCFG: "Gpio/****/MCLK","gpio"
^SCFG: "Gpio/****/PULSE","gpio"
^SCFG: "Gpio/****/PWM","gpio"
^SCFG: "Gpio/****/RING0","gpio"
^SCFG: "Gpio/****/SPI","rsv"
^SCFG: "Gpio/****/SYNC","std"
^SCFG: "Gpio/port/MCLK","GPIO4"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","ELS61-E R2"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEShutdown/sVsup/threshold","0","0"
^SCFG: "MEopMode/CFUN","0","1"
^SCFG: "MEopMode/Comp1",""
^SCFG: "MEopMode/CregRoam","0"
^SCFG: "MEopMode/ExpectDTR","current"
^SCFG: "MEopMode/ExpectDTR","powerup"
^SCFG: "MEopMode/SoR","off"
^SCFG: "MeOpMode/SRPOM","0"
^SCFG: "Radio/Band/2G","0x00000014"
^SCFG: "Radio/Band/3G","0x00000081"
^SCFG: "Radio/Band/4G","0x08080085"
^SCFG: "Radio/Mtpl/2G","0"
^SCFG: "Radio/Mtpl/3G","0"
^SCFG: "Radio/Mtpl/4G","0"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "RemoteWakeUp/Event/USB","none"
^SCFG: "RemoteWakeUp/Ports","current"
^SCFG: "RemoteWakeUp/Ports","powerup"
^SCFG: "Serial/Ifc","0"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","005B","Cinterion Wireless Modules
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","10"
^SCFG: "Tcp/TLS/Version","MIN","***"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/OTAP","0"
^SCFG: "Urc/Ringline","local"
^SCFG: "Urc/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","","","0"
^SCFG: "Userware/DebugMode","off"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","null",,,,"off"
^SCFG: "Userware/Watchdog","1"