Gemalto is now part of the Thales Group, find out more.

You are here

Community > Forum > Cellular Hardware > BGS5T USB driver Windows 8/8.1

BGS5T USB driver Windows 8/8.1 | Thales IoT Developer Community

Like
0
6
dstefek's picture
dstefek

September 4, 2015 - 3:58pm, 3905 views

Hi,

We got driver from our distributor, but I want to check if there is some new version availabe (for Winb 8 for example)? The driver supplied should support Win7 64-bit, but I can't install it as well

USB driver detail: DriverVer=01/07/2013, 1.1.1.0
Modem driver details: DriverVer=08/29/2012,1.00.0000.0

Thanks!

6
Comment
Log in or register to post comments
Alopez's picture
Alopez
Sep 8 2015 - 8:22am

Hi,

THis drivers works in Windows 8 and 8.1. the driver is not signet and your system will not allow to install it if you has not disabled the signature comprobation in the start up of Windows.

Just disable the drivers signature in Windows 8.x to isntall the driver

Regards

Alopez

Somewhere over the rainbow!!! Looking for the Oz Land!!!

dstefek's picture
dstefek
Sep 7 2015 - 4:02pm

Thanks, I will try to disable signature check. Still, seems to me my driver files are little bit old. And inside inf files are no mention about Win 8. Only XP through Win 7.

Bartłomiej Gemalto Moderator's picture
Bartłomiej Gema...
Sep 7 2015 - 4:27pm

Hello,

This is the latest officialy released driver.

Widows 8 is not officialy supported but it should be working in Win 8.

Regards,

Bartłomiej

dstefek's picture
dstefek
Sep 8 2015 - 2:11pm

Thanks!

dstefek's picture
dstefek
Sep 17 2015 - 4:23pm

Unfortunately I was not able to install drivers under Windows 8.1 even with disabled driver signature. The USB to COM port is recognized, but for modem it does not accept driver I have.

Workaround is to use Lenovo drivers for Qualcomm, but I can't suggest that method to my customer.

I will appreciate any help, or install routine. Thanks!

Bartłomiej Gemalto Moderator's picture
Bartłomiej Gema...
Sep 18 2015 - 4:24pm

Hello,

It should be working at least with Win7.

Have you been using other Gemalto modules with these computers before? Or maybe some other similar USB devices. I'd start with finding some freeware software that would be able to display all USB devices and drivers (even hidden and not currently connected) that were ever connected to the PC. Please then remove all Gemalto devices and try again with the installation. Maybe you will also find some unused devices.

Have you tried to install this terminal in some other system version?

Is it working fine with Lenovo drivers for Qualcomm?

Can you send the ATI1 command reply?

Regards,

Bartłomiej