Gemalto is now part of the Thales Group, find out more.

You are here

Community > Forum > Cellular Hardware > Reboot the board remotely with an SMS

Reboot the board remotely with an SMS | Thales IoT Developer Community

Like
0
3
Jess7's picture
Jess7

July 1, 2016 - 1:37pm, 3323 views

Hi!

Could someone tell me how i can reboot my EHSx remotely or the AT command to reboot it?

Thanks to all!

3
Comment
Log in or register to post comments
Bartłomiej Gemalto Moderator's picture
Bartłomiej Gema...
Jul 1 2016 - 2:57pm

Hello,

You can use AT+CFUN=1,1 command to reboot the module - you would need to implement some code in your application that would trigger this command execution on incoming SMS with some specific content. You could also use OTAP for this (a feature that is used for remote installation or update of applications) - you could try to delete the application that does not exist for example. But if you haven't used AT^SJOTAP command on the module the OTAP feature is disabled for security reasons. You may read more about OTAP in Java User's Guide and AT Commands Specification documents.

Best Regards,

Bartłomiej

Jess7's picture
Jess7
Jul 1 2016 - 4:07pm

Thanks! yes, i have disabled OTAP but with "AT+CFUN=1,1" is enough

Alopez's picture
Alopez
Jul 5 2016 - 2:28pm

Hi,

Now you can send a **** SMS OTAP to the module. This SMS will reset the module

Regards

ALopez

Somewhere over the rainbow!!! Looking for the Oz Land!!!