Gemalto is now part of the Thales Group, find out more.

You are here

EHS6T Start-up issue | Thales IoT Developer Community

October 6, 2016 - 9:39am, 10766 views

Previously the EHS6T appeared to operate ok, but now appears to be continually resetting itself.

Monitoring the serial port with HyperTerminal, initially on Power up it repeately gave ^SYSLOADING messages, then after a number of minutes alternating between ^SYSLOADING and ^SYSINFO: 202.

Tried sending at^scfg="Userware/Autostart","","1"   but made no difference.

Doesn't respond to any AT commands.

The above means I also cannot establish a USB connection to the device.

What can I do to get it back to its defaults.

Thank you.