Gemalto is now part of the Thales Group, find out more.

You are here

Cables and Connectors to Use 12 pin GPIO interface | Thales IoT Developer Community

November 17, 2016 - 11:24am, 2868 views

Hello!
I'm currently building an app operating a device via Serial. Currently I'm operating it via DB9 RS232 port but for the final setup I'll rather use the ASC1 instead of the ASC0 serial interface. To do so, I will have to aquire a cable and connector which allows me to do so. I will only need to use ASC1, so RX1, TX1 and GND will be needed. 
What kind of cable/connectors shall I use? I'm not finding many information about it.

Thanks.