Gemalto is now part of the Thales Group, find out more.

You are here

BGS5T can't communicate trough RS232 | Thales IoT Developer Community

November 4, 2014 - 10:20am, 3401 views

I am trying to communicate with my module trough Termite terminal and issue AT commands. USB connection works fine, but when I connect through RS232 I get no response or  weird response:

at

ů[02][18][04][00][13]7[00][13][00][00][00]Ją6[00][16]^±[04]SIO:

CTS and DSR lights are on

Settings:

Baud rate: 9600

Data bits: 8

Stop bits: 1

Flow control: RTS/CTS

I am also appending CR.

This is my scfg:

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/****/ASC1","std"

^SCFG: "Gpio/****/DAI","gpio"

^SCFG: "Gpio/****/DCD0","std"

^SCFG: "Gpio/****/DSR0","std"

^SCFG: "Gpio/****/DTR0","std"

^SCFG: "Gpio/****/FSR","gpio"

^SCFG: "Gpio/****/PULSE","gpio"

^SCFG: "Gpio/****/PWM","gpio"

^SCFG: "Gpio/****/RING0","std"

^SCFG: "Gpio/****/SPI","rsv"

^SCFG: "Gpio/****/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","1","1"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","null",,,,"off"

^SCFG: "Userware/Watchdog","0"

I allready tryed reinstalling device.