Gemalto is now part of the Thales Group, find out more.

You are here

EHS6 Power On Sequence | Thales IoT Developer Community

July 2, 2020 - 8:33am, 1108 views

Hi 

We are using EHS6 module with one microcontroller running on 2MHZ/48Mhz clock speed based on our requirement. So, Sometimes when we switch clock speed of the controller EHS6 stops transmitting/receiving the commands on UART. All though we are using the baud rate based on the clock speed. 

Can you share the power on sequece of the EHs6 module. I think we are missing something in power on sequence.