Gemalto is now part of the Thales Group, find out more.

You are here

Error AT^SJAM=4 on BGS5T | Thales IoT Developer Community

March 15, 2021 - 4:01pm, 1674 views

Hello,

I have module BGS5T with JRC: Java Remote Control MIDlet Suite","Cinterion","1.50.8","1"

If I use AT^SJAM=5 I get normal response but on AT^SJAM=4 I get: +CME ERROR: not found

What is the reason? Is there any change from JRC 1.50.3 to 1.50.8? Is there document that describes changes?

Here is output of at^scfg if it helps:

at^scfg?

^SCFG: "Call/ECC","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Gpio/****/ASC1","std"
^SCFG: "Gpio/****/DAI","gpio"
^SCFG: "Gpio/****/DCD0","std"
^SCFG: "Gpio/****/DSR0","std"
^SCFG: "Gpio/****/DTR0","std"
^SCFG: "Gpio/****/FSR","gpio"
^SCFG: "Gpio/****/PULSE","gpio"
^SCFG: "Gpio/****/PWM","gpio"
^SCFG: "Gpio/****/RING0","std"
^SCFG: "Gpio/****/SPI","rsv"
^SCFG: "Gpio/****/SYNC","std"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","BGS5"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEopMode/SoR","on"
^SCFG: "Radio/Band","15"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/Otap","0"
^SCFG: "URC/Ringline","local"
^SCFG: "URC/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","450"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","asc1",,,,"off"
^SCFG: "Userware/Watchdog","1"

Regards,

Jure