You are here

Cinterion® Concept Board: Tools & Documentation

Documentation, February 4, 2014 - 12:05am, 19792 views

Everything needed to start creating with our Cinterion Concept Board. If you already have your personal Concept Board, please go to http://www.concept-board.com/ to get access to the Installation Package, also including the necessary drivers.

Downloads

Please Log in or register to download the files.

1 - 10 of 13 Comments

Pages

antero.markkula@enkom.fi's picture
antero.markkula...

The concept board is great. It includes a lot of I/O and an expansion bus, too.
If you read the documentation, including the schematics, you have a lot of information to make your own design.
Again, this product includes a very good Java support!
I have been playing around with the board and it is working fine.

Antero Markkula
Communication and Mechatronics

Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi

Cheatah's picture
Cheatah

Please elaborate on the following from the Concept Board Hardware Interface Description:

> EHS6 enumerates, i.e., registers with the USB host, as a CDC-ACM
> Composite USB device supporting eight separate interfaces. This
> is the Composite Communication enumeration.
> Under Microsoft® Windows XPTM, Microsoft® Windows Vista® and
> Microsoft® Windows 7 this USB device implements a Modem port (a
> virtual USB Modem port) plus six further communication ports as well as a
> reserved port. The Modem port as well as the ports enumerated 3 to 5 are
> AT command interfaces, i.e., these ports are accessible by AT command
> and may be used as control and data interfaces.

Linux registers 7 ttyACM interfaces (0 to 6).
ttyACM0 responds to AT commands
ttyACM1 and 2 do not
ttyACM3 responds to AT commands but with echo feature deactivated (can be activated with ATE1 command
ttyACM4 and 5 respond to AT with echo enabled
ttyACM6 does not speak AT

Please explain the difference between the communication channels. The remarks about the Windows drivers seems to apply, port 0 and 3-5 speak AT. Please also explain the exact purpose of each port (including 1, 2 and 6) so I can perhaps get this right in the Linux cdc-acm driver with the correct dialects.

> The interfaces - with the exception of the reserved port - are controlled by
> separate device drivers running on the Windows host. These drivers may
> be standard USB drivers integrated in Windows. The driver configuration
> files for Windows (.inf files) are supplied by Gemalto and need to be
> installed before the device can be used.

Where can I find the Windows drivers? They weren't included in the package and I cannot find a download link. These might provide me with some hints.

manfredkube's picture
manfredkube

Regarding windows drivers and development tools for the Cinterion® Concept Board:

For the time being, owners of the board can register at http://www.concept-board.com and download the installation package, which also includes the necessary drivers.

Please have your IMEI handy - the 15-digit number starting with 35.. printed on the bottom of the EHS6 wireless module on the Concept Board.

I know it's a bit of a detour right now, but we're looking into simplifying this for you in the not too distant future.

Do let us know here in the forum what you will create with your Concept Board!

Enjoy,
Mani

Manfred Kube
Head of M2M Segment Marketing / Director Business Development mHealth
St-Martin-Str. 60
81541 Munich, Germany
www.gemalto.com/m2m

iandaintith's picture
iandaintith

Hi Mani,

I have registered and received my user name. I am probably being a little stupid but I cannot see where you download the installation package from http://www.concept-board.com. Can you help? Thanks Ian

asokfair's picture
asokfair

Even me have the same Problem!

Bartłomiej Gemalto Moderator's picture
Bartłomiej Gema...

If you already have the username you need to click "Concept Board Support" on the left of the page from the link. Or just follow this link: http://m2m.gemalto.com/developer-zone/concept-board-support.html

FedexUY's picture
FedexUY

Hello Manfred.

Buy the concept board some time ago.

When I go to register on the web http://www.gemalto.com/m2m/development/cinterion-concept-board/support tells me that the IMEI is invalid.

I've tried every day but always tells me the same!

Might you help me?

Thanks
Federico Ettlin

iandaintith's picture
iandaintith

I was hoping to use my board but it seems I have to wait for my registration in order to get the drivers - or am I missing something ?

YAJIMA's picture
YAJIMA

I downloaded documents of the concept board.
But Sheet:7/7 of "Concept_Board_Schematicas.pdf" is missing.
Please provide it.

ashvayka's picture
ashvayka

Hi! I have lost my installation CD. Where can I find download page for Cinterion Mobility Toolkit?

1 - 10 of 13 Comments

Pages

Gemalto Admin