After many installations AT^SJAM=0,"","" giving ERROR | Thales IoT Developer Community
April 20, 2018 - 1:32pm, 4261 views
Hi
iam working with EHS5.
after many installations we are facing problem in installing applcation.
i set at+cmee=2
and then
AT^SJAM=0,"***.jad",""
giving UNKNOWN ERROR.
not even allowing us to delete the application using sjam=3
ATI
Cinterion
EHS5-E
REVISION 03.001
OK
i found that after format only its allowing us to install application.
can any one suggest or explain this issue.
Hi, What about other commands AT^SJAM=4, AT^SJAM=5?
What do you mean by "format"?
Best regards,
Michał
hi
AT^SJAM=5 giving all running applications
which include 123.jad for example
i want to reinstall the 123.jad by stopping it.
AT^SJAM=4 giving all installed applications correctly;
at this time not even allowing us to delete the Installed applications also.
What do you mean by "format"?
this is cleaning the FFS. i.e by using MESFormat.exe in MES suite available.
I think your application is still running. Please try to stop it furst using e.g. AT^SJAM=2,"a:/123.jad"
Hi Michal thanks for the response.
i checked with at^sjam=5 only JRC is running no other application is running.
i also checked with At^sjam=2 its also giving eror
Could you please share the AT log? With AT^SJAM=4..5..2..3..0 ?
Hi, im working on gemalto m2m using plsx configurations.. im facing the same issue at^sjam=4 is not working it hangs there itself if i run this command. also at^sjam=5 showing the currently running jrc. iam not able to nstall the applicaion inside the module.. it will be very helpful if you have anything to share..
Regards
Hello,
Could you write some more about your problem. What module do you have - ATI1 reply?
AT^SJAM=5 works while AT^SJAM=4 hangs? How long? Is it possible to send AT commands on this or any other interface? And what is the result while you try to install/strart/stop the MIDlet? Is coping files to module's FFS working?
Thanks,
Bartłomiej