Subscribe to our newsletter
August 23, 2017 - 4:17am, 591 views
I was wondering if there is a command available to measure how many bytes have been sent/received from the ehs5 module. I am currently using the PPP to aquire the IP address etc.
thanks in advance,
If you are using PPP then you could measure on the application side. There is no *****er and AT command to read it.
It is possible to read the sent and received data while using IP services over AT commands.
You will be able to ***** the bare data that you send and receive but this will not be the same as the data transfer that is *****ed and charged by the operator - it is only possible on the operator side.
© 2013-2020 THALES DIS AIS Deutschland GmbH