Gemalto is now part of the Thales Group, find out more.

You are here

BGS5T GPIO6 and GPIO8 always 0 | Thales IoT Developer Community

February 28, 2016 - 7:29pm, 3418 views


I am having a similar problem as

I have done everything in that post and I am able to correctly define GPIO21 and GPIO7 as input or output however I am having problems configuring GPIO8 and GPIO6. I have tried to configure them as inputs using various methods and none of them seem to work. 

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/****/ASC1","std"

^SCFG: "Gpio/****/DAI","gpio"

^SCFG: "Gpio/****/DCD0","std"

^SCFG: "Gpio/****/DSR0","std"

^SCFG: "Gpio/****/DTR0","std"

^SCFG: "Gpio/****/FSR","gpio"

^SCFG: "Gpio/****/PULSE","gpio"

^SCFG: "Gpio/****/PWM","gpio"

^SCFG: "Gpio/****/RING0","std"

^SCFG: "Gpio/****/SPI","rsv"

^SCFG: "Gpio/****/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","2","2"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","asc0",,,,"off"

^SCFG: "Userware/Watchdog","1"

Any ideas? Thanks