Gemalto is now part of the Thales Group, find out more.

You are here

AT command config for EXS82T-W for work with SMS and GPRS data send/receive | Thales IoT Developer Community

AlexLV

January 20, 2021 - 3:16pm, 110 views

Hi, need help a little from persons who works more with modems. I need to use EXS82T-W modem with Unitronic Vision PLC.

Below some default configuration for BGS2T and EHS6T. But they are differs and they not working with EXS82T-W.

BGS2T:

AT&F
ATE0
AT+CPIN=^****^
WAIT 3
AT^SCFG="GPRS/ATS0/withAttach","off"
AT&C1&D0&S0Q0S0=0V1
ATX4
WAIT 3
AT+CPMS=SM,SM,SM
AT^SGCONF=540,8
AT^SCFG="Radio/Band/HandOver",1
AT&W0
ATI

 

EHS6T:

+++
ATH
|||AT+CFUN=0,1
WAIT 9
AT
<PIN CODE>
WAIT 3
ATI
AT&D1&C1
AT+CLIP=1
AT^SCFG="GPRS/ATS0/withAttach","off"
ATS0=1
AT+CSNS=4
AT^SCFG="Tcp/WithURCs","off"
WAIT 3
AT^SGCONF=540,8
AT^SCFG="Radio/Band/HandOver",1

Some of AT commands not working with EXS82 and modem not initialised. So advice is needed for more correct configuration for EXS82T-W

BR,

Alexander