Gemalto is now part of the Thales Group, find out more.

You are here

EHS6 development environment problems. | Thales IoT Developer Community

May 6, 2014 - 7:12pm, 4505 views

Hello, I have installed the EHS5 SDK on computer (windows 7) and on a windows XP virtual machine (virtual box). As IDE I installed first Netbeans 7.3 and later Netbeans 8.0. The problem is I cannot get Netbeans to work with the module simulator. MES is working fine and also the drivers are installed. (Multiple USB Comport 1 t/m 6 and a Debug Modem USB). I connected the module through the USB connector. The device address manager even find the module and the Dailup connection looks like to work. UPDATE: It looks like that it is a problem in the HelloWorld netbeans sample project itself! The RS232Demo Netbeans project is working for me! Anyone any idea? :( NETBEANS OUTPUT Starting emulator in execution mode Registering ip address "192.168.244.1" of remote debugging device... Waiting for debug device registration of "IMP_NG_EHS5_REMOTE"... Passing control to external device emulator... *** Error *** Failed to connect to device 0! Reason: Emulator 0 terminated while waiting for it to register! End of debug session. Emulator is closed! WM_DEBUG_CONFIG.INI # # This ini file is used to configure emulator.exe # [General] # Define the used module type ModuleType=EHS5 ConnectionName=IP connection for remote debugging of EHSx [Debug] # AT command for module initialization before debug session InitAtCommand=ATE0 # IP addresses for remote debugging of module and debug host # The address range 10.x.x.x is not supported for remote debugging! LocalIpAddress=192.168.244.2 RemoteIpAddress=192.168.244.1 AT^SCFG? ^SCFG: "Call/ECC","0" ^SCFG: "Gpio/mode/ASC1","std" ^SCFG: "Gpio/mode/DAI","gpio" ^SCFG: "Gpio/mode/DCD0","std" ^SCFG: "Gpio/mode/DSR0","std" ^SCFG: "Gpio/mode/DTR0","std" ^SCFG: "Gpio/mode/FSR","gpio" ^SCFG: "Gpio/mode/HSIC","rsv" ^SCFG: "Gpio/mode/PULSE","gpio" ^SCFG: "Gpio/mode/PWM","gpio" ^SCFG: "Gpio/mode/RING0","std" ^SCFG: "Gpio/mode/SPI","rsv" ^SCFG: "Gpio/mode/SYNC","std" ^SCFG: "GPRS/AutoAttach","enabled" ^SCFG: "Ident/Manufacturer","Cinterion" ^SCFG: "Ident/Product","EHS6" ^SCFG: "MEopMode/SoR","off" ^SCFG: "MEShutdown/Fso","0" ^SCFG: "Radio/Band","511" ^SCFG: "Radio/OutputPowerReduction","4" ^SCFG: "Serial/Interface/Allocation","1","1" ^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0058","Cinterion Wireless Modules","EHx","" ^SCFG: "Tcp/IRT","3" ^SCFG: "Tcp/MR","10" ^SCFG: "Tcp/OT","6000" ^SCFG: "Tcp/WithURCs","on" ^SCFG: "Trace/Syslog/Otap","0" ^SCFG: "Userware/Autostart","0" ^SCFG: "Userware/Autostart/Delay","0" ^SCFG: "Userware/DebugInterface","192.168.244.1","192.168.244.2","0" ^SCFG: "Userware/DebugMode","on" ^SCFG: "Userware/Passwd", ^SCFG: "Userware/Stdout","usb1",,,,"off" ^SCFG: "Userware/Watchdog","1" at^sjam=4 ^SJAM: "a:/HelloWorld.jad","HelloWorld","Gemalto M2M GmbH","1.0",0,3560,0 ^SJAM: "a:/JRC-1.50.9.jad","Java Remote Control MIDlet Suite","Cinterion","1.50.9",1,669007,0 OK at^sjam=5 ^SJAM: "a:/JRC-1.50.9.jad","Java Remote Control MIDlet Suite","Cinterion","1.50.9",1 OK ati1 Cinterion EHS6 REVISION 02.000 A-REVISION 00.000.03 OK