EHS6T Start-up issue | Thales IoT Developer Community
October 6, 2016 - 9:39am, 10765 views
Previously the EHS6T appeared to operate ok, but now appears to be continually resetting itself.
Monitoring the serial port with HyperTerminal, initially on Power up it repeately gave ^SYSLOADING messages, then after a number of minutes alternating between ^SYSLOADING and ^SYSINFO: 202.
Tried sending at^scfg="Userware/Autostart","","1" but made no difference.
Doesn't respond to any AT commands.
The above means I also cannot establish a USB connection to the device.
What can I do to get it back to its defaults.