Gemalto is now part of the Thales Group, find out more.

You are here

ELS61-US Error whilst setting up dialup connection | Thales IoT Developer Community

August 15, 2018 - 5:39pm, 3795 views

Hi,

I've been trying to setup a ELS61-US board in Windows 7 had many different issues; 

I have followed the CD instructions through multiple ***** and reinstalled the setup more ***** than i care to imagine and still am no closer to being able to run the test projects on the board. 

My issue now is when i try to connect to the module via a dial up connection (Setup via the CD) I get the following error;

    Error 692: There was a hardware failure in the ****m (or other connection device). 

AT^SCFG response

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/****/ASC1","gpio"

^SCFG: "Gpio/****/DCD0","gpio"

^SCFG: "Gpio/****/DSR0","gpio"

^SCFG: "Gpio/****/DTR0","gpio"

^SCFG: "Gpio/****/FSR","gpio"

^SCFG: "Gpio/****/PULSE","gpio"

^SCFG: "Gpio/****/PWM","gpio"

^SCFG: "Gpio/****/RING0","gpio"

^SCFG: "Gpio/****/SPI","gpio"

^SCFG: "Gpio/****/SYNC","gpio"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","ELS61-US"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEShutdown/sVsup/threshold","0","0"

^SCFG: "MEopMode/CFUN","0","1"

^SCFG: "MEopMode/CregRoam","0"

^SCFG: "Radio/Band/3G","0x0000001A"

^SCFG: "Radio/Band/4G","0x0000081A"

^SCFG: "Radio/Mtpl/3G","0"

^SCFG: "Radio/Mtpl/4G","0"

^SCFG: "Serial/Interface/Allocation","0","0"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","005B","Cinterion Wireless Modules","ELSx",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/OTAP","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"

^SCFG: "Userware/DebugMode","off"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","null",,,,"off"

^SCFG: "Userware/Watchdog","0"

Not sure what the next steps are as i've also had other issues including error 734 ppp errors etc. it seems anything i do i run into issue after issue.