Gemalto is now part of the Thales Group, find out more.

You are here

Community > Forum > Cellular Hardware > Enable DIAG/DM diagnostic port in PLS8-E

Enable DIAG/DM diagnostic port in PLS8-E | Thales IoT Developer Community

Like
0
2
Wojtek_dz's picture
Wojtek_dz

July 11, 2019 - 2:19pm, 1726 views

Hi

We need to enable DIAG/DM diagnostic port to make layer 3 radio capture with QXDM.

How we can enable it? Checking manual looks like it should be enabled with ^SSRVSET  ^SCFG but after trying different combination so far it did not work for us.

Any ideas how enable diagnostic port? If I'm not wrong, it is same as firmware download port.

2
Comment
Log in or register to post comments
ADAM GEMALTO's picture
ADAM GEMALTO
Jul 11 2019 - 2:48pm

Hello,

I think this question should be handled by Gemalto internal ticketing system. Could you please involve your local distributor?

Thanks,
Adam

Wojtek_dz's picture
Wojtek_dz
Jul 15 2019 - 7:38am

It started to work after drivers reinstallation what is quite strange. Anyway it works