Gemalto is now part of the Thales Group, find out more.

You are here

PH8 stops responding | Thales IoT Developer Community

June 9, 2015 - 9:44am, 1732 views

Testing out a new board using a PH8. Connected via serial at 57600 after disabling USB using AT^SDPORT=2.

Found that if I reset the device several ***** in quick succession by pulling down EMERG_OFF then IGT, device seems to shut down and stops responding. PWR_IND signal turns on when IGT activated but then turns off few seconds and stays off. Also  get several screens of random characters come out on terminal connected to device. Tried same with EU3 modem and that doesn't do the same thing.