PLS8-E with GPS disappears from the system | Thales IoT Developer Community
November 16, 2017 - 10:41am, 2457 views
We have a problem with gemalto pls8-e with gps.
When we activate the 4g connection and GPS, the modem disappears from the system (OS: centos). We use the usb line of the PCI module. It is necessary to turn off the PC's power supply so that it can be seen again on the system once it is restarted. The standby configuration is disabled. The module uses the pre-configured profile 2 of the gemalto modem. If the gps is not activated, no problem. The power supply of the module seems sufficient. Do you have any leads on this standby?
Thanks a lot,