Gemalto is now part of the Thales Group, find out more.

You are here

Problem with EHS6 | Thales IoT Developer Community

vipermsq

June 2, 2016 - 10:27pm, 1145 views

I have a problem with a EHS6T and one month ago it started to fail in some answers to certain commands in the midlet app. for example if i send the command cops by the application it answer like the format was in HEX but if i send the same command by the terminal the answer is normal , see the diference below.

I tried to format it, i updated the firmware, i sent te command AT+CSCS="GSM" and it confirm the format is GSM but nothing happens i need to make it work normally again.

thanks for your help

SYSTEM.OUT STARTED
MIDlet:com.cinterion.jrc.JRC_Midlet autostart
MIDlet:com.gemalto.Main autostart
***********************
START APP
***********************
SENDING DATA = AT+CSQ
DATA RECEIVED = AT+CSQ
+CSQ: 23,99

OK

SENDING DATA = AT+COPS?
DATA RECEIVED = AT+COPS?
+COPS: 0,0,"0043006C00610072006F",2     -- answer in the application

OK

******************
RESTARTING PROCESS
******************
************************
THREAD SLEEP = 5 MINUTES
************************


command by terminal

at+cops?
+COPS: 0,0,"Claro",2                                 --------- answer by terminal

OK