What is the right format for AT^SISX="Ntp" | Thales IoT Developer Community
February 11, 2017 - 8:56pm, 4132 views
Chip firmware: ELS31-V, Version: 4.3.2.0-25421
Modem return ERROR to command AT^SISX="Ntp",3,"wwv.nist.gov"
What is wrong with command format?
Thanks,
Hello,
Please paste the complete log and also set AT+CMEE=2 to see the error description.
Regards,
Bartłomiej
The complete log:
at^sica=1,3
OK
at^sica?
^SICA: 1,1
^SICA: 2,0
^SICA: 3,1
^SICA: 4,0
^SICA: 8,0
OK
AT+CMEE=2
OK
AT^SISX="Ntp",3,"wwv.nist.gov"
+CME ERROR: Incorrect parameters
Is it possible that it has something to do with DNS? Have you tried with IP?
Have you checked AT^SISX=? to check the possible connection profiels?
AT^SISX=?
^SISX: (service), (0-6), (host), (0-30), (200-10000)
I have tried several NIST servers with same result.
DNS works fine:
AT^SISX="HostByName",3,"wwv.nist.gov"
^SISX: "HostByName","24.56.178.140"
Hello,
I have found out that there was a problem with NTP and some fix has been made for that. But as this is still a pre-release product version you would have to contact your module's provider to ask if there is any updated firmware available that solves this problem.
Regards,
Bartłomiej
I will contact the provider.
Thanks, Bartłomiej.