Subscribe to our newsletter
October 29, 2018 - 3:48pm, 1103 views
sometimes when I open a socket with a server, using at commands, through RS232 or USB after the connections is closed modem sends me thousands of white spaces. My module is BGS5 and EHS5
Which FW version for each module are you using? What type of connection was established: transparent **** or non-transparent ****? Could you please provide any details related to the server you connected to?BR,
the FW version:
CinterionBGS5REVISION 01.100A-REVISION 00.000.21
CinterionEHS5-EREVISION 03.001A-REVISION 00.000.55
The connection is transparent ****, and the server is typical socket in ascii, it is an own server.
If I understood correctly, you wrote, that it is your own server, which you setup for test purpose. Have you tried to test transparent connection to other servers with these modules? If not, I would recommend testing with other servers as well.
to this server are connected thousand of differents devices working property. It is not a server to do only this test.
Could you write what to do, step by step, to reproduce your issue? Can you write more information about your server and how you close your socket connection? As you say there is thousand of different devices, so only EHS5 and BGS5 have received this white space or those devices are working on defferent way? Just to be sure, can you test your modules with different server?
we have tried with different servers and same result.
The other devices connected with this server never received this white space.
The module fails sometimes when we repeat this sequence, at the time that the server close the connection.
1.- AT^SICS=5,conType,GPRS02.- AT^SICS=5,user,"orange"3.- AT^SICS=5,passwd,"orange"4.- AT^SICS=5,apn,"m2m.orange.es"5.- AT^SISS=9,srvType,"Socket"6.- AT^SISS=9,conId,57.- AT^SISC=98.- AT^SISS=9,"address","socktcp://*.*.*.*:*;etx"9.- AT^SISO=910.- AT^SIST=90084200000101000000015000000000000000000000000001008934012041444194429110100000000EF
any news about this issue.
You have written that these whitespaces are sent when the connection is closed. And they are not sent by the server as I understand.
Your log ends on opening the connection and switching to transparent ****.
Can you precise what is the scenario for closing the connection and paste the log - does the module switch to AT commands **** and close the connection or is it closed by the server while the interface is still in data ****?
Can you describe the hardware setup that you are using for this test. Is it some developer board, terminal, some custom board? Is hardware flow control used?
Thanks and regards,
the connection is closed by the server.
We can reproduce the problem via USB or RS232 in both BGS5 and EHS5.
The hardware to sent this test to the modem is PC with Windows.
Attached an example of the problem
Best RegardsFallo BGS5 USB.txt
Thank you for the answer.
In a meantime I've found out that such problem was already reported to support line and it's currently being investigated. The report comes from your company. So I think that we can't do anything more on a forum. Please keep in touch with your Gemalto contact person or reseller.
© 2013-2020 THALES DIS AIS Deutschland GmbH